La Cimbali and Faema E98 complete steam wand — insulated stainless steel, 3+1 tip
Part no. ET-100324
Complete steam wand in stainless steel for La Cimbali and Faema E98 machines, supplied with insulating protection, a nut with O-ring and a flat 3+1 hole tip. The insulated body stays cooler on the outside, which means less risk of burns, less milk baked onto the wand and quicker cleaning between orders. It replaces wands that are bent, loose at the joint or leaking steam.
It is listed for La Cimbali and Faema in the E98 model. If you have another brand or model, send us a photograph of the fitted wand and its joint so we can confirm compatibility before you order the part.
What is included in the assembly?
The stainless steel tube, the insulating protection, the nut with its O-ring and the flat 3+1 hole tip. It is a complete assembly, ready to fit in place of the old wand.
What difference does the insulation make?
An uninsulated wand reaches burning temperature within seconds of the steam opening. An insulated body passes less heat to the outer surface, which means three things: less risk of burns while moving the jug, less milk baked onto the tube and quicker cleaning between orders.
What are the signs that it needs replacing?
Steam or water leaking at the connection, which points to a worn seal and joint; an uneven jet, from scaled holes or a worn tip; and bending or play, which spoil the texturing angle and soon bring the leak back.
Can I replace only the tip?
You can, as the tip is available separately. But once the joint or the body are worn, the complete assembly gives a longer-lasting result than piecemeal replacement. Request a quote using the form on this page.
All brand names are registered trademarks of their respective owners and are used solely to indicate part compatibility. ESPRESSOTECHNIC is not an authorised representative of these brands unless expressly stated otherwise.
