Elbow pipe bent at 90° for the heat exchanger inlet, with a 1/4″ male thread at each end and a total length of 140 mm. Made from low-lead CW510L brass, an alloy that resists corrosion and is suited to drinking water contact. It keeps flow and pressure steady in the machine's hydraulic circuit.
Prices and availability on request. We reply in English or Portuguese.
Specifications
Part type
tube inlet heat exchanger (elbow)
Angle
90°
Thread
1/4″
Length
140 mm
Material
low-lead brass CW510L
FAQ
What are the dimensions of this pipe?
It is 140 mm long, bent at 90°, with a 1/4″ male thread at both ends. It is worth measuring the pipe currently fitted before ordering, as circuits that look alike often use different lengths.
What is it made of?
It is machined from low-lead CW510L brass. The alloy was developed for equipment in constant contact with hot drinking water and stands up well to scale and corrosion inside the boiler circuit.
What does it do in the machine?
It connects the water circuit to the heat exchanger, where brew water is raised to coffee temperature. If this section is blocked by scale or leaking, pressure at the group drops and extraction loses consistency.
Is this a compatible replacement part?
Yes, it is a replacement part dimensioned like the pipe it replaces: 140 mm end to end, a 90° bend and a 1/4″ male thread. The threads are machined to size, so there is no play or seepage once fitted.
How do I order?
Request a quote through the form on this page, giving the make and model of the machine and the length of the pipe being replaced. We ship from Portugal to the whole of Europe.
All brand names are registered trademarks of their respective owners and are used solely to indicate part compatibility. ESPRESSOTECHNIC is not an authorised representative of these brands unless expressly stated otherwise.
