Tubing & Fittings
Hoses and tubes, fittings, ogive cones, nuts and capillary tubes — reliable water and steam connections.
20 products
Espresso machine pre-infusion valve — triangular pin, CW510L brass
- Overall length52.8 mm
- Inner pintriangular — 14 mm
ET-100073
Braided stainless steel hose 50 cm — 3/8″ F-F thread with conical elbow
- Length50 cm
- Connections3/8″ female — F-F
ET-100075
Braided hose 150 cm — 3/8″ F-F thread with conical elbow
- Length150 cm (1.5 m)
- Connections3/8″ female — F-F
ET-100076
La Spaziale boiler elbow, 90° male L-fitting — 1/8″ thread, 4 mm tube
- Part typefitting elbow L shape (Elbow Fitting)
- Angle90°
ET-100105
Espresso machine tube ogive cone 12 mm — 1/2″ nut
- Part typeogive cone / Ogive (Pipe Tip)
- Tube size12 mm
ET-100127
Brass nut 1/2″ — Ø 14 mm bore, for espresso machines
- Part typenut pressure connection (Brass Nut)
- Thread1/2″
ET-100128
Braided stainless steel hose, 36 cm — 3/8″ F-M thread with conical elbow
- Part typehose braided (braided stainless steel)…
- Length36 cm
ET-100307
La Cimbali and Faema brass tube ogive cone — 3/8″ thread
- Part typeogive cone / ogive cone (ring sealing…
- Materialbrass
ET-100332
Espresso machine tube ogive cone — 3/8″ nut, 10 mm end
- Part typeogive cone / ogive cone (ring sealing…
- Nut size3/8″
ET-100333
La Cimbali ogive cone — 1/8″ thread, 90 mm
- Typeogive cone / electrode water level…
- Thread1/8″
ET-100376
Wega / Astoria pump fitting — 3/8″ to M18×1.5 adapter
- Materialbrass
- Compatible withline pump machines Wega and Astoria
ET-100383
Brass sealing washer for Astoria / Faema P4 valve — 25.8 × 16.5 mm
- Part typeflat gasket metal joint valve (Tap…
- Materialbrass
ET-100388
La Marzocco Mini CE complete water connection kit
- Part typekit complete connection water (Water…
ET-100407
La Cimbali M24–M39 group feed copper tube
- Part typecopper tube feed group (Copper Tube…
- Materialcopper with connections brass
ET-100408
La Cimbali dual cooling copper tube
- Materialcopper; nut connection brass
- Compatible withLa Cimbali
ET-100409
La Cimbali group return tube assembly
- Materialcopper tube · nut brass
- Compatible withLa Cimbali
ET-100410
Related guides
- Rotary vs vibratory pump: differences, faults, replacement — How to tell a rotary vane pump from a vibratory pump, which symptoms point to a failing pump and what to check before replacing it on an espresso machine.
- How to set espresso pump pressure to 9 bar — Where to read and how to adjust pump pressure on an espresso machine: the by-pass screw, manufacturer values and the mistakes to avoid.
- Water Hardness, Softeners and Descaling Explained — How to measure water hardness, the values machine makers ask for, when to regenerate a softener, and why boiler descaling is a job for a technician.
- How to Identify the Right Part and Request a Quote — What to have ready before asking for a spare part: brand, model and rating plate, measurements, photos and the ET reference. Then how to request a quote.
All brand names are registered trademarks of their respective owners and are used solely to indicate part compatibility. ESPRESSOTECHNIC is not an authorised representative of these brands unless expressly stated otherwise.