La Cimbali single-phase safety thermostat 170 °C
- Model / part numberSP011 CM/2
- Cut-out temperature170°C — factory setting
ET-100039
Sensors & Instruments
Temperature and level probes, pressure switches and sensors, thermostats, pressure gauges, flowmeters and sight glasses.
46 products
Sanremo and La Marzocco PID control temperature probe
- Sensor typeNTC model 3K3
- Body materialstainless steel AISI 316L
ET-100045
Casadio and La Cimbali PID control temperature probe
- Product typekit complete temperature probe (Probe…
- Compatible brandCasadio · La Cimbali
ET-100046
La Cimbali magnetic water level sensor
- Sensor typereed switch magnetic (Reed Switch)
- Contact typenormal open — N.O.
ET-100048
La Cimbali M39 and M39GT pressure sensor — for Faema Emblema
- Part typepressure transducer electronic…
- Outletsignal analogue to board
ET-100049
Rancilio and Promac pressure sensor
- ManufacturerHUBA Control — Switzerland
- Part typepressure sensor electronic (Transducer)
ET-100050
La Cimbali M32 water level sight glass — 12 × 110 mm
- Part typewater level sight glass (Level Glass /…
- Diameter × length12 × 110 mm
ET-100101
La Spaziale water level sight glass — 11 × 150 mm
- Part typewater level sight glass (Level Glass)
- Diameter × length11 × 150 mm
ET-100102
Wega water level sight glass — 5 black lines, 11 × 170 mm
- Part typewater level sight glass (Level Glass)
- Dimensions11 × 170 mm
ET-100103
Two-magnet flowmeter impeller
- Part typeimpeller inner flowmeter (Impeller /…
- Magnettwo magnet
ET-100104
La Cimbali M29 and M22 double pressure gauge
- Part typepressure gauge double (Dual Pressure…
- Red needle (pump)0 to 15 bar
ET-100125
Faema E64 and E66 double pressure gauge
- Part typepressure gauge double (Dual Pressure…
- Needle 1 (pump)0 to 15 bar
ET-100126
Three-phase safety thermostat 169 °C — 30 A, 400 V, universal
- Cut-out threshold169 °C
- Current / voltage30 A — 400 V (three-phase)
ET-100174
Gicar wired flowmeter for La Cimbali and Faema — 1/4″
- Water connectionthread 1/4″
- Electrical connectionwire — cable ready
ET-100195
Ma-Ter XP110 single-phase pressure switch — 0.5–1.5 bar, 16 A
- Typepressure switch single-phase (control…
- Adjustment range0.5 to 1.5 bar (factory 1 bar)
ET-100210
Gicar flowmeter cap with LED — CW510L brass
- Typecap and connector electrical flowmeter
- IndicatorLED position pulse
ET-100216
Gicar OT57 flowmeter cap — without LED, ±OUT output
- Typecap and connector electrical flowmeter
- ModelOT57
ET-100217
Boiler level probe — 180 mm length, 1/4″ thread, NSF certified
- Typeprobe (electrode) water level control
- Length180 mm
ET-100219
Wega and Astoria water level sight glass — 11 × 170 mm, Ø 11 mm
- Typewater level sight glass
- Diameter11 mm
ET-100224
Gicar flowmeter 1/4″ with LED — 1.15 mm jet, NSF certified
- Connection thread1/4″
- Nozzle1.15 mm (calibrated)
ET-100225
Gicar flowmeter 1.15 mm with LED and ±OUT connector — for La Cimbali and Sanremo
- Orifice1.15 mm
- IndicatorLED simultaneous with pulse
ET-100226
Pressure gauge capillary tube — 120 cm length, 1/8″ F coil, nut at both ends
- Typecapillary tube (Capillary) pressure…
- Length120 cm
ET-100237
Astoria and Wega (CMA) double pressure gauge — Ø 65 mm, for La Pavoni and La Spaziale
- Typepressure gauge double — boiler + pump
- Bezel diameter65 mm
ET-100238
Astoria and Wega double pressure gauge — Ø 69 mm
- Typepressure gauge double — boiler + pump
- Bezel diameter69 mm
ET-100239
Sanremo and Vibiemme Evolution double pressure gauge — Ø 69 mm
- Typepressure gauge double — boiler + pump
- Bezel diameter69 mm
ET-100240
Sirai P302/6 three-phase pressure switch — 30 A, 0.5–1.4 bar
- Pressure adjustment range0.5 to 1.4 bar
- Rated current30 A — suitable for circuit three-phase
ET-100275
Faema temperature probe — 1/2″ thread, for E98 and E91
- Part typesensor (probe) temperature boiler
- Thread1/2″
ET-100303
La Spaziale temperature probe — 3/8″ thread, for S5 and Vivaldi
- Part typesensor temperature boiler
- Thread3/8″
ET-100304
La Cimbali boiler water level float — fill control
- Part typefloat water level control boiler…
- Applicationcontrol draining automatic boiler
ET-100308
Faema E61 water level sight glass — 12 × 175 mm
- Part typewater level sight glass
- Dimensionsdiameter 12 × length 175 mm
ET-100313
La San Marco 105 water level sight glass — 15 × 115 mm
- Part typewater level sight glass
- Dimensions15 × 115 mm
ET-100314
SAB and SV double steam and pump pressure gauge — Ø 66 mm
- Part typepressure gauge double (steam + pump)
- Bezel diameter66 mm
ET-100325
Nuova Simonelli Appia double pressure gauge — steam and pump pressure
- Part typepressure gauge double (steam + pump)
- Compatible withNuova Simonelli model Appia
ET-100326
Faema E98 double pressure gauge, white dial — for La Cimbali M27
- Part typepressure gauge double (steam + pump)
- Dialwhite — needle and ° high-contrast
ET-100327
Bezzera Ellisse double pressure gauge — Ø 70 mm, 0–16 bar
- Typepressure gauge double (two scale)
- Bezel diameter70 mm (section outer)
ET-100328
La San Marco double steam and pump pressure gauge — Ø 70 mm, 85/95
- Part typepressure gauge double (steam + pump)
- Disc diameter70 mm
ET-100329
Unic double steam and pump pressure gauge — Ø 70 mm, 0–20 bar
- Part typepressure gauge double (steam + pump)
- Disc diameter70 mm
ET-100330
Astoria / Wega pressure switch — 2 bar, 1/8″ thread
- Part typepressure switch (switch control…
- Operating pressure2 bar
ET-100359
Gicar vertical flowmeter — 1.8 mm jet, vertical outlet
- Typeflowmeter vertical, line low pressure
- CertificationNSF · UL
ET-100362
Astoria single-needle pump pressure gauge — 0–16 bar, Ø 62 mm
- Typepressure gauge single needle (pressure…
- Body diameter62 mm
ET-100363
La Marzocco thermostat 140 °C / 250 V — manual reset
- Cut-out temperature140 °C
- Compatible withLa Marzocco
ET-100372
La Marzocco PT1000 temperature probe — 100 mm
- Compatible withLa Marzocco Linea PB · Strada AV
- QualityLa Marzocco
ET-100375
La Cimbali M15 water level sight glass — Ø 12 × 135 mm
- Typeglass water level (Sight Glass) boiler
- Diameter12 mm
ET-100378
La Cimbali pressure sensor (transducer)
- Part typesensor (transducer) pressure electronic
- Functionsize continuous pressure boiler and…
ET-100385
Related guides
- Rotary vs vibratory pump: differences, faults, replacement — How to tell a rotary vane pump from a vibratory pump, which symptoms point to a failing pump and what to check before replacing it on an espresso machine.
- How to set espresso pump pressure to 9 bar — Where to read and how to adjust pump pressure on an espresso machine: the by-pass screw, manufacturer values and the mistakes to avoid.
- Boiler pressostat: what it is, adjustment and faults — What the pressostat does on an espresso machine, typical boiler pressures, how it is adjusted safely and the faults technicians see most often.
- Boiler heating element: multimeter test and selection — How to test a boiler heating element with a multimeter, which ohm values to expect, the symptoms of failure and how to choose the replacement.
- 2-Way and 3-Way Solenoid Valves: Symptoms and Coil — How 2-way and 3-way solenoid valves work in an espresso machine, the fault symptoms, how to check the coil and what to match when replacing one.
- Anti-Vacuum Valve and Boiler Safety Valve Explained — What the anti-vacuum valve and the boiler safety valve do, the signs of failure, set pressures by model, and why they must never be altered.
- Water Hardness, Softeners and Descaling Explained — How to measure water hardness, the values machine makers ask for, when to regenerate a softener, and why boiler descaling is a job for a technician.
All brand names are registered trademarks of their respective owners and are used solely to indicate part compatibility. ESPRESSOTECHNIC is not an authorised representative of these brands unless expressly stated otherwise.